Faqs
ArttyStation products are very easy to assemble if you are a modeler who often enjoys crafting Pla-Models.
You would be able to assemble a product as easy as assembling an entry-level model kit with ArttyStation Assemble Instruction in the product box (can be downloaded from ArttyStation website).
The actual time to assemble the product will differ for each person, but usually it takes anywhere from 1 hour to 4 hours to complete ArttyStation Assemble.
Super glue is most convenient to work with because it’s superior adhesive strength, and fast drying time, however, due to the characteristic of super glue it could leave a mark if it runs down.

Wood glue provides excellent adhesion, and easy cleaning of excessive glue with wet wipes for clean assembles, but it takes longer to dry and less adhesive compared to super glue.

Standard wood adhesives are not recommended for usage due to insufficient adhesive strength.
A finish-pin gun (headless pin) can be used along with glue to finish assemble for an extra sturdy workstation. Standard nail gun for woodwork (with nail head) is too thick to be used on ArttyStation materials, therefore, not recommended to be used, and finish-pin gun (headless pin) is highly recommended.

For the best result, prepare headless pins of 25~35mm to be used for holding, and the pins of 10~15mm for finishing touches. Both electric and air pin gun may be used for tool. If you already own a high-pressure compressor for airbrush, you may only need air pin gun. Nevertheless, ArttyStation assembled with glue only will work just as fine.
ArttyStation uses high-density MDF that are more durable compared to a general MDF. All MDF material being used for ArttyStation is coated on both sides with clear, or white for convenient cleaning on general stains with water or special cleaners for the stain. But due to characteristics of the material, it may deform if it is exposed to humidity for extended time or high moisture, so please, keep in mind when cleaning.
All MDF material being used for ArttyStation is coated on both sides with clear, or white for convenient cleaning on general stains with water or special cleaners for the stain. But due to characteristics of the material, it may deform if it is exposed to humidity for extended time or high moisture, so please, keep in mind when cleaning.
Don't worry about it. If the product you received is damaged, take a picture of it and send it to arttystationph@gmail.com After checking the picture, we will immediately ship new parts of the damaged parts to the customer. We pay for delivery if it is not the customer's fault. Thank you.
The delivery time of the product depends on your province. Common delivery time is as follows,
- Metro Manila 2-3 days
- Provinces 5-7 days
The above delivery time may be shortened or longer, depending on the circumstances.